Recently Obtained Project Best Practices Guidelines for the Management of Pressure Parts in a Power Plant

power plant.png

ETD is pleased to announce another triumphant achievement with guidelines for the Management of Pressure Parts in a Power Plant for a North African based plant.

The client has a program to develop a best practice manual for the management of pressure parts in a power plant. The thermal power plant is comprised of many high temperature and high-pressure components that are a critical part of the power generating cycle. These systems are susceptible to damage if not operated and maintained properly. Failure of these components is usually very catastrophic and could pose a risk to human life as well as incurring major downtime of a facility and associated costs of lost production. In most jurisdictions these systems are governed by regulatory bodies in order to ensure that they are maintained to a standard.

As ETD have carried out various practical review and survey type projects on risk assessment, condition assessment, life assessment and cost analysis studies including review of clients’ data on cost issues, risk events, maintenance programs, reliability and availability of plants, fleet wise comparison/benchmarking of plant performance for European, USA and Asian utilities, etc. Therefore ETD were asked to prepare a best practices document that identifies various pressure components in a boiler/ HRSG, describes the damage that can occur to them both under base-load and flexible operating conditions, the existing inspection and monitoring techniques, the development of new and more recent innovative techniques, repair practices and strategies and how to use all of these techniques to keep pressure parts in good condition and operate a power plant efficiently and at an optimum cost. This document included a management framework to ensure that all parts are being operated and maintained according to established standards in the industry and meet all the regulatory requirements. ETD have also carried out comprehensive reviews of related areas such as ‘on-line monitoring tools’, ‘developments in risk-based maintenance programs and inspection techniques’, ‘guidelines for CCGT/HRSG lifing and risk-based approaches’, ‘plant cycling (both conventional and CCGTs/ HRSGs)’, damage due to cyclic operation and risk-based inspection, power plant component replacement strategies and technical and financial risks, etc. Through its Group Sponsored Projects (GSPs) ETD has developed new and more sophisticated techniques for power plant inspection and these have included the development of the portable Scanning Force Microscope (SFM), Electrical Discharge Sampling Equipment (EDSE) - a spark erosion device for ‘boat sampling’, and its precision portable hardness tester known as the ‘Smart Sleeve’.

The document will explain the different challenges with respect to fired and non-fired boilers and describe the importance of burner adjustment to avoid flame impingement. It will cover the degradation mechanisms affecting the materials and the degradation rate. The understanding of these factors can lead to appropriate re-inspection intervals and to the establishment of effective inspection methods.

Both time-dependent and time-independent degradation mechanisms will be discussed. Waterside and fireside corrosion, flow assisted corrosion, the performance of different alloys in boilers and steam pipework, preservation while off-line, why when and how to chemically clean pressure parts, inspection, testing and record keeping procedures, keeping the steam turbine and condensers in good order, feed heaters, boiler feed pumps boiler chemistry and blowdown, steam blowing, efficiency checks, pressure tests will be discussed. Alternative methods to hydro testing, such as detailed NDE using new state-of-the-art NDE techniques, will be discussed to help limit the damage to pressure components in old plants. In terms of component preservation both dry and wet preservation techniques for long and short-term preservation will be discussed and guidelines provided.

The maintenance philosophy/ strategy should be based on the belief that it is possible to avoid unwanted equipment failures and unnecessary maintenance activities through appropriate application of various techniques supported by proven processes and procedures carried out by well-managed and competent personnel. To ensure maintenance management can achieve the business objectives such as plant availability and reliability targets, maintenance performance needs to be reported and monitored. This would then be used as input for initiating the improvement cycle. This improvement program will trigger revision of the maintenance strategies and/or change in the way utilities operate the plant. This is performed continuously to ensure that any operator can deliver what is expected by the owner.

The outcome of this project will be a manual for the management of pressure parts of power plant. This manual will offer a practical guide as to how the integrity of boiler / HRSG pressure parts is managed with emphasis on the best practices.

This study will help the participants to understand how a successful pressure part management program can deliver benefits related to better informed strategic decisions, increased operational efficiency, safety and integrity of the equipment.

For more information on our guidelines & reports, please click here.

ETD's Invitation to Join New & On-Going Group Sponsored Projects (GSPs)

In response to the needs of the international industry, ETD Consulting regularly launches new multi-client projects which are open to all.

ETD has excellent expertise through its in-house R&D, plant service/technical consulting and project management experience and links with plant manufacturers, plant operators, service providers and researchers from around the world. The company is thus in an ideal position to conduct such projects on behalf of project partners/sponsors and bring together plant experience from best run plants and the latest technology development in Europe, Japan, USA and elsewhere.

The benefit of joining these GSPs, in which costs are shared, is that each participant gains the data and results of the whole project at a fraction of the total project cost. All work is carried out by ETD and its expert staff/ consultants but the sponsors determine its direction.

Please click on the image to access more information about each of our GSPs

ETD delivers training on Boiler / HRSG Integrity, Life Assessment & P91 Issues in Manila, Philipinnes

Two of ETD Consulting's trainers successfully delivered a 3 day training course to delegates in Manila, Philippines from 15 to 17 January 2014 

The course covered – Boiler / HRSG Integrity & Life Assessment; P91 Heat treatment, Welding & Inspection.

For more details on the training courses ETD Consulting can offer you, please click here.

Trainers & delegates at the training course

Trainers & delegates at the training course